Ohlins RXF36 Trail M2 Air TTX18 27.5

Axle Type
Offset
Steerer Type

Ohlins RXF36 M.2 Trail Air 27.5 MTB Fork

The race proven TTX 18 dampening from the DH Race Fork has been reworked for the all new TXF 36 M2 fork to give optimal traction and control on trails and Enduro race courses. The RXF 36 M2 is available as an Air or Coil fork. The TTX 18 cartridge kit featuring trail optimised 18mm piston for improved small bump sensitivity. With increased damping pressure bandwidth the damping valve response and sensitivity has improved. The damping adjustment range is set specifically for trail to Enduro race use with 15 clicks of low speed compression and low speed rebound. For the high speed compression damping you get 3 clicks plus a climb mode setting. The re-tuned twin piston three chamber air spring system allows total air spring tuning from the initial movement through to the bottom out.We also improved the tire clearance. The chassis will take up to a whopping 29 x 2.8 and 27.5 x 2.8 as well as 27.5+ x 3.2. There are many technical improvements in the fork but we did not stop there, the design has also been updated and matches what you see on the race courses.

Ohlins PSG

Ohlins RXF36 M.2 27.5 Air Features

  • TTX damper technology
  • Overall improvements for reducing friction
  • Independent spring and damper system
  • Retuned air spring system
  • Infinite 'ramp up' adjustment with just a shock pump
  • 36 mm upper tube diameter
  • 44mm short offset and 51mm normal offset available
  • Max tyre size 27.5 x 2.8
Ohlins RXF 36 M2 Trail Air 27 5

Ohlins RXF 36 M2 Air 29 Specification

Travel
120mm / 140mm / 150mm / 160mm / 170mm
Travel Adjustment
Internal - Service & Parts required
Axle Spacing
110mm Boost
Axle Type
15mm Floating Thru Axle
Damper Type
Twin Tube
Spring Type
3 Chamber Air Spring
Compression Adjustment
High & Low Speed
Rebound Adjustment
Low Speed
Ait Spring Volume Adjustment
Infinite Adjustment via 3 Chamber Airspring
Stanchion Diameter
36mm
Stanchion Coating
Hard Anodised
Offset
44mm or 51mm
Steerer Type
Tapered 1 1/8 - 1.5
Steerer Material
Aluminium
Axle to crown height
Min. Rotor Size
180mm
Max. Rotor Size
203mm

Ohlins RXF 36 M2 Air Custom Tuning

Usable range. That's the Ohlins approach to clickers and dials. One setting doesn't necessarily suit every trail and environment. Steep, wet and gnarly is very different to dry, smooth and flowy. Each requires a different approach in order to get the maximum benefit from your suspension. The idea of 'useable range' is that every combination of user accessible adjustment, even the extreme limits of the dials, should result in a completely rideable experience giving you all the options you need to make on trail adjustments in response to changing conditions. To achieve this we can tune each fork and shock to suit you, your bike and your riding style and make sure you're getting the correct useable range and maximising the performance of your suspension.

Custom tuning is free of charge for all Ohlins suspension at time of purchase through BRINK. Further adjustments can be made later for a small additional fee or as part of a standard service.

Ohlins Custom Tuning Compression Chart
Ohlins Custom Tuning Rebound Chart

Plush Suspension Service & Tuning

We are in the unique position to offer you in-house industry-leading suspension service and custom tuning through our sister business Plush Suspension.

We can support you with all your suspension service needs as well as offer our unique Plush Setup service to get your entire suspension setup dialled in for your weight and riding style.

We can even custom tune your Ohlins suspension to get the best possible performance from you and your bike!

Click below to read more about Plush Suspension service and tuning

Plush Suspension